When cutting aluminum tubes, if you do not pay attention to related problems, it will affect the cutting effect. So many construction workers will ask what questions to pay attention to when cutting. They will then learn about the relevant cutting considerations. I hope you will pay attention to the relevant issues when cutting.
1. The choice of saw blade. When choosing a saw blade, it should be noted that the hardness of the aluminum tube itself is not as large as that of the steel tube, so the cutting difficulty will be less. However, this does not mean that you can choose any saw blade. If the selected saw blade is not sharp enough, it is easy to cause the aluminum to stick when cutting. In addition, when using the saw blade, pay attention to regular replacement, so as to achieve the cutting effect.
2. The choice of lubricating oil. When cutting aluminum pipes, pay attention to selecting the appropriate lubricant to avoid dry cutting. If dry cutting occurs, burrs are prone to appear on the cut aluminum tube. Also, it is very difficult to remove these burrs. Also, without lubricating oil, the saw blade can suffer a lot of damage.
3. Angle control. While many aluminum tubes are cut straight, some may require bevels. If you need a bevel, pay attention to the angle. If possible, it is best to choose equipment such as CNC sawing machines for cutting to avoid unnecessary waste caused by wrong cutting.
The above are three aspects to pay attention to when cutting aluminum tubes. If you want a better cutting effect, you must pay special attention to these three aspects, so that the final cut aluminum tube can better meet the requirements of use. If you encounter problems during the cutting process, solve them in time so that you can cut them later.
Post time: Jun-02-2022