PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong Detail:

Brand Name:wanlutong

Place of Origin:shandong, China (Mainland)

Product name:Aluminum Strip

Thickness:0.1-6mm

Width:10-2600mm

Application:louver/window-shades/transformer

Hardness:Soft

Temper:O – H112

Certificate:ISO9001:2008

Color:Silver Aluminum Color

Surface:Smooth

Standard:GB/T3880-2006

Export To:World

Non-standard specifications can be customized.

ALUMINUM STRIP

Description:

Aluminium strip of raw material is pure aluminum or aluminum alloy cast-rolling aluminum coil, hot rolled coil, cold rolled machine for different thickness and width of rolling sheet aluminum coils, again according to the purpose, the vertical cutting and slitting machine for different width of the ribbon.

Aluminum with specific purposes are: aluminum transformer with aluminum foil (transformer), high frequency welding hollow aluminum bar with aluminum belt, finned radiator with aluminum belt, cable with aluminium belt, stamping aluminum strip, aluminum side bar with aluminum belt, etc.

The aluminium strip is a deep processing product formed by cutting and processing aluminum. It is an important raw material in industry.

Depending on the alloy element in the aluminum belt, the aluminum strip and the aluminum plate are also divided into 8 series. However, the current series is 1000,3000,5000 and 8000 series.

According to the annealing status of the aluminum belt, the aluminum belt can be divided into the whole soft (o state) semi-rigid (H24) all hard (h18). Currently the most commonly used should be in the whole soft series, because the O state is easier to stretch and bend.

The main processing equipment of the aluminum belt is a sub-unit, which can be divided into the length and width as needed. Of course, the processing equipment is general, and can be processed with copper volume, and the product is called copper belt.

The raw materials for electronic products no longer rely on pure copper belt, due to the conductivity of aluminium only lower than copper, so the ribbon instead of copper strip is becoming an international trend.

Uses:

The use of aluminum belt is many, such as: aluminum plastic compound pipe, cable, cable, transformer, heater, shutter, and so on.

1060 requires high resistance to corrosion and forming, but not high intensity, and chemical equipment is a typical use.

1100 is used for processing needs good formability and high corrosion resistance but does not require a high intensity of component parts, such as chemical products, food industry equipment and storage containers, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, printing plate, nameplate, reflective apparatus

Plate, thick plate, drawing tube. Extruded tube can be used as long as the whole aluminum cans tanks, demanded higher than 3003 alloy parts, chemical products production and storage equipment, plate processing, construction, cable pipes, sewer pipes, all kinds of spare parts of lamps and lanterns.

3003 board. Strip. The foil. Thick plate, stretch tube. Extruded tube. Type. Great. Wire rod. Cold working steel bars, cold wire, rivet wire, forgings, foil, heat sink material is mainly used for processing need good formability, high corrosion resistance, or solderability good parts, or requires both these performance need to 1000 series alloy high strength artifacts, such as the transportation of liquid tank and tank, pressure tank, storage device, heat exchanger, chemical equipment, aircraft fuel tank, oil pipe, reflector, kitchen equipment, washing cylinder, rivet and soldering wire.

5052 the alloy has good forming performance, corrosion resistance, can candle, fatigue strength, medium static strength, used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, etc.

Brand:

The alloy plate Numbers of commonly used aluminum belts are 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, etc.

Chemical composition

Chemical composition(%

Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Other Al Al
single total
1050 0.25 0.4 0.05 0.05 0.05 / / 0.05 0.03 0.03 / 99.5
1060 0.25 0.35 0.05 0.03 0.03 / / 0.05 0.03 0.03 / 99.6
1070 0.2 0.25 0.04 0.03 0.03 / / 0.04 0.03 0.03 / 99.7
1100 0.95 0.05-0.2 0.05 / / / 0.1 / 0.05 0.15 99
3003 0.6 0.7 0.05-0.2 1.0-1.5 / / / 0.13 / 0.05 0.15 Re
3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 / / 0.25 / 0.05 0.15 Re
5005 0.3 0.7 0.2 0.2 0.5-1.1 0.1 / 0.25 / 0.05 0.15 Re
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 / 0.1 / 0.05 0.15 Re
8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.05 / 0.1 0.08 0.05 0.15 Re

Product detail pictures:

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong detail pictures

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong detail pictures

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong detail pictures

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong detail pictures

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong detail pictures

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong detail pictures

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong detail pictures


Related Product Guide:
The Myriad Benefits of Aluminum Coil
5 Steps to Wrap a Window Sill Using Aluminum Coil

PriceList for Prepainted Aluminum Coil For Roofing - Aluminum strip – Wanlutong, The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    WhatsApp Online Chat !