Pjatë çeliku inoxështë në të vërtetë një lloj produkti që nuk është i lehtë për të prodhuar gërryer, përveç në disa raste serioze. Në fakt, është e pamundur që çdo produkt të mos korrodohet, nëse pllaka jonë e çelikut inox është e gërryer, mund të ndikojë në përdorimin e tij normal, kështu që ne duhet të bëjmë disa masa parandaluese për të shmangur këtë situatë. Këtu janë dy faktorë që mund të shkaktojnë gërryerje të pllakave të çelikut të pandryshkshëm.
1. Korrozioni elektrokimik.
Stainless steel plate due to the scratch caused by contact with carbon steel parts, stainless steel plate after the formation of galvanic cells with corrosive medium, which will produce electrochemical corrosion, pickling passivation effect is not good, it will also make the passivation film on the surface of the plate is not uniform or too thin, so it is easy to produce electrochemical corrosion, splash and other easy rust material attached to the plate, after the formation of galvanic cells with Medium korroziv, duke rezultuar në gërryerje elektrokimike, pastrimi i pasivizimit të turshi nuk është i pastër, duke rezultuar në produkte të mbetura të korrozionit kimik të lëngshëm pasivizimi me pjatë me pllaka, dhe më pas formojnë gërryerje elektrokimike me pllakën.
2. Korrozioni kimik.
Under certain conditions, many oil, dust or acid, salt attached to the surface of stainless steel plate into corrosion medium, chemical reaction with some components of the plate, resulting in chemical corrosion and rust, cleaning pickling passivation is not clean enough 3 caused by residual liquid remaining, thereby directly corroding the plate, plate surface was scratched, resulting in passivation film destroyed, Therefore, the protection ability of the plate is reduced, easy to react with chemical medium, Korrozioni kimik dhe ndryshku.
Koha e postimit: Shkurt-22-2023